Water damage in the flooded basement usually leads to mold if not dried and cleaned immediately and properly. Water damage and mold are two quite common issues most homeowners may face in their lifetime. Though neither can be prevented 100 percent of their time, many helpful tips can minimize the risk. Why can’t water damage or mold be prevented entirely? Straightforward. You can not control Mother Nature.
Most of us know that everything around us gets older and starts to decay. That is the entire life process everything must go through. Trees grow, drop over eventually, and begin to decay. Streams cut to the earth and eventually, a Grand Canyon is formed. Temperature changes cause the earth to contract and expand and rain creates the dirt swell.
With all these things happening around us you have to be observant of the changes occurring and take proper actions. To begin with, let’s focus on basement flooding and water damage. We all know that when water enters your house, it ought to be cleaned up immediately or harm can occur. Your finished basement walls will absorb the water like a sponge and cause the warmth to deteriorate, eventually, crumble right before your eyes. Wood flooring can also consume this water and swell, buckle and warp. The key is never to permit water to enter your house except in controlled situations such as when you are cleaning the ground or cleaning. Check these around the house to prevent water infiltration. Click here for more information.
- Check your gutters and clean them after the leaves have ceased falling. This will make sure that winter snow can melt and drain properly without obstruction. Additionally, check your gutters in the spring so you are ready for the winter storms.
- Exterior drains. Places such as your patio could have storm drains that have to be clear of obstacles.
- Check your window seals on the inside and out. Older homes typically have caulking that could have dried out and hastened. Water could get inside and cause unseen damage involving your inner wall and the exterior wall.
- Assess your taps don’t drip. Water damage begins with just one drop of water which may grow to a flood. Additionally, should your exterior faucet drips before the winter freeze, then the moist soil can enlarge and place enough strain on your home foundation to create a fracture. Then as soon as the spring thaw comes, all that suspended dirt can drain to your cellar at the shaped crack.
- Assess all of your interior hoses and faucets. Ensure taps don’t trickle or have rust on them and hoses are not cracked or leaking.
- Check the humidity inside your house during winter. Your windows and exterior facing walls can sweat if it is too cluttered. Most windows can handle this condensation but it’s excessive it may cause problems. Maintain your humidity steady throughout the year. It is best to keep it about 30-35 percent.
Now let’s discuss mold. That is something every town, state, and also the country has. You can not do away with it but you can learn to control it. Mold requires a cool, dark, and moist environment to thrive. As mentioned above, maintaining your house humidity between 30-35 percent is the first step to restricting the moisture level inside your house. Secondly, is ventilation. If your house is airtight and you have no air circulation, you’ve got a house ideal for mold. Ceiling fans, box fans, as well as opening your windows permits air to circulate that helps prevent mold growth. It sounds counter-intuitive in that opening windows would allow mold spores to go into your home. Authentic, but spores are not a problem as long as you do not provide them an environment to grow.
Cleaning your house so you don’t have mold growth is a bit of a science but also a few fantastic old fashion remedies too. The first point to consider when cleaning is never to leave water on the surface longer than necessary. What that means is to wash and dry thoroughly. By way of example, if you’ve got a wood floor and use a mop, you expose the timber to moisture which causes it to consume and occasionally accumulate under the wood. Always use the recommended wood cleaning solutions. The tips below are to help prevent mold from growing and cleaning present mold until it gets out of control. In case it gets out of control, you’ll need professional assistance to eliminate it.
- Consistently utilize wood cleaning products on your hardwood flooring. Never mop using a wet mop.
- If you spill water on your carpet or wood flooring, wipe it up and wash it as soon as you possibly can. Blot wet carpets with paper towels until no more water can be consumed after standing on the paper towel with the heel of the foot.
- The kitchen and bathroom countertops should be wiped dry after use. Water that accumulates from the seams of the wall or back-splash is breeding grounds for mold.
- Maintain your refrigerator dry. Never put hot items into the fridge since they will lead to steam.
- Inspect your shower and bathtubs to ensure the tile grout and seals are in good shape. Vinyl bathtub surrounds should be sealed.
- If mold is located on a nonporous surface, bleach or ammonia can be used.
- If mold is located on a porous surface, 35 percent hydrogen peroxide can be used on the mold. Allow to penetrate the surface for a couple of minutes and then scrub to remove the mold. Wipe the surface dry. The exact amounts to be combined depending on the amount and kind of mold you are cleaning. Note: 35 percent hydrogen peroxide can cause bleaching and can lead to burns. Read the warning labels and instructions that come with 35% food grade hydrogen peroxide.
Some companies specialize in water restoration and professional mold removal that have some high-tech instruments and substances to combat mold. Normally, these organizations are called when it is too late to tackle the problem yourself or you aren’t able to do it yourself. Their job is to wash out the affected area so that mold spores are not spread to other locations.
Regrettably, most people aren’t aware they have a problem before it is now serious. If you’ve got a circumstance, where it’s beyond your skills to repair or clean, it’s best to speak to a professional water damage restoration or mold remediation business. They typically utilize your insurance company to ensure they pay for cleaning and repairs.